Index 1 Index 2 Index 3 Index 4 of 4

y56-the roof now wieghts about 20kg, so should finsh at about 22kg with the hand rails y57-scales only weight upto 14kg, so the roof was weighed in two halves y58-the new longer hand rails y59-the old stands where first washed in nitric acid (left) and then buffed on a machine (right) and will now be laquered y-60 buffing the brass pliers y-61 all the brass piller, incuding the new end ones, the crome rail used is just for ilustration z01-the roll of glass cloth, 135gsm, plainweave z02-some test squares to test diffrent aplication techniques z03-TEST1, drymethod grp sheath, pouring on epoxy z04-TEST1, drymethod grp sheath,spreading on the epoxy z05-TEST1, drymethod grp sheath,was the epoxy wets the cloth you can see it going clear! z06-TEST2, wet method grp sheath,pouring o the intial epoxy z07-TEST2, wet method grp sheath,sprading out the intail expoy z08-TEST2, wet method grp sheath,laying the cloth over the wet epoxy z09-TEST2, wet method grp sheath,pouring on the secondary epoxy z10-TEST2, wet method grp sheath,sprading out the 2ndary eopxy z11-TEST3, stright epoxy with white pigment z12-TEST3, stright epoxy with white pigment, rollering ou the epoxy z13-TEST1&2,the finished affect of the grp sheathing z14-once the grp sheathing is cured i coverd it with a layer of pigmented epoxy z15-pouring on the pigment epoxy z16-rollering the white epoxy over the grp z17-didnt mix quite enought to fully coat all the grp, but you get an idea of the finish z18-this is the Epoxy only test with a 2nd coat over half of it z19-weiging the test peices z20-highdesity fillet sample z21-lowdesity fillet sample

Generated with Arles Image Web Page Creator